Fire System Services
Home
: Introduction
: FAQ's : Contact
Us : Terms &
Conditions : Disclaimer
Automatic Fire Suppression
Systems : Bush
Fire Fighting Equipment : Cylinder
Testing : Exit
& Emergency Lighting
Fire Extinguishers : Fire
Extinguisher Training : Fire
Hose Reels : Fire Regulations
: Fire Safety
: Fire
& Smoke Detection
Rechargeable Batteries :
Smoke Emitters : WaterJel
Fire Blankets
Fire Extinguisher Training
Fire System Services also conducts training sessions in the use of fire fighting equipment. The sessions consist of basic theory of fire behavior, evacuation procedures & practical hands on were we demonstrate the different behavior types of extinguishers. Practical training is were the trainees get to experience the use of different types of extinguishers.
It is important to note that Fire System Services chooses not to use or burn fossil fuels for training exercises. We use a LGP fire extinguisher training simulator called Fast Tray.
Fast Tray - Fire Extinguisher
Training Simulator
Fast
Tray operational instructions
Fast
Tray with Co2
This avi file shows the fast tray being used with a co2 fire extinguisher. It demonstrates that the tray will reignite after being extinguished.
Fast
Tray flame height
This avi file shows the fast tray being used with the
adjustable
flame height.
Fast Tray readily simulates a fire for the purpose of fire extinguisher training. Fast Tray is a professional fire training apparatus designed by professionals in the fire training field for professionals and is manufactured by Fire System Services. The Fire Tray operates by igniting LPG to simulate a small fire. The flow of gas and flame is controlled with the flick of a switch, giving the trainer instant and total control of the LPG flame. With a state of the art electronic ignition system and no messing around with petroleum based fuels, this system provides for quick set up and stowing away. Due to the clean combustion of LPG the Fast Tray conforms to the Environmental Protection Association regulations.
So Why Purchase A Fast Tray?
Essential skills
can be easily learnt when using the Fast Tray.
Offering large and small businesses
alike a
basic training
session which includes the identification and correct selection
of an extinguisher, approaching a fire and proper use of a fire extinguisher.
This training session shows your clients/employees that you take workplace
fire safety seriously
and will educate and prepare them for a
fire emergency situation.
Flammable and combustible materials can be identified in all places of work and realistic fire extinguisher training can ensure a safer working environment for employees. The Home Offices Fire Precautions (Workplace) Regulations 1997 state that employees should be able to operate any fire fighting equipment provided and sufficient numbers of employees should be trained in the use of fire extinguishers, particularly in areas where there are special risks.
In addition the Fast Tray was designed and built for in the field in house maintenance. There is no need for the unit to be returned back to Fire System Services for maintenance, apart from electronics upgrade.
Fast Tray - the way fire training should be!
Features
Controller
Recently introduced a Large Heavy Duty controller with 12v 7amp sealed lead
acid battery.
This controller is designed for those who need to train for longer periods and
do not have adequate time for battery recharging.
Fast Tray
Australian Made.
Low cost on going maintenance.
No hand lighting required.
EPA & Environmentally Friendly.
Propane (LPG) fueled , requires
no solid combustibles.
No 240v electrical connections.
Stainless Steel Construction.
Quick Connect Gas Fittings.
Military Spec 5015 Multipole
Connectors.
9.0kg LPG bottle included (supplied
empty).
1/4 braded armoured LPG Hose.
Rapid Flame Knock Down: safety
feature.
12v Rechargeable Battery Operation
(240v battery charger provided).
Very quick re-ignition time
once the flame has been extinguished.
User friendly, extremely portable
& quick set up features.
660 x 660 x 550 road case with
heavy duty carry handles.
Size of Tray 600mmW x 600mmL
x 350mmH (Larger sizes can be ordered).
Flamebar
Flamebar
This avi file shows the flamebar being demonstrated.
The Flamebar creates a variable wall of
flame which the height can be adjusted. At full height the flame
can reach up to1.0m wide by 1.0m high depending on the air flow "wind".
Not to take away from the Fast Tray, the Flamebar can create a differnt
demention to your fire simulation.
Clients
